| Quantity: | |
|---|---|
  | Type | I.D. | O.D. | W.P. | B.P. | B.Radius | Weight | ||||
| dash | inch | mm | inch | mm | Bar | Psi | Bar | mm | Lb/ft | Kg/m | |
| WB-06 | 3/8" | 10.0 | 0.87 | 22.0 | 1000 | 14500 | 2500 | 230 | 0.685 | 1.02 | |
| WB-08 | 1/2" | 12.0 | 1.03 | 26.2 | 1000 | 14500 | 2500 | 250 | 0.941 | 1.40 | |
| WB-12 | 3/4" | 19.0 | 1.42 | 36.0 | 1000 | 14500 | 2500 | 270 | 1.694 | 2.52 | |
| WB-06A | 3/8" | 10.0 | 0.87 | 22.0 | 1250 | 18125 | 3125 | 230 | 0.860 | 1.28 | |
| WB-08A | 1/2" | 12.0 | 1.03 | 26.2 | 1250 | 18125 | 3125 | 250 | 1.243 | 1.85 | |
The Water-blast Hose with High Tensile construction is engineered specifically for the extreme demands of ultra-high-pressure water jetting and cleaning applications. This specialized hose is built to withstand pressures often exceeding 1000 bar (15,000 PSI) and higher, safely conveying pressurized water, sometimes mixed with abrasives or cleaning agents. Its core strength lies in the high tensile steel wire reinforcement, providing the necessary structural integrity to contain these immense forces, ensuring operator safety and reliable performance in critical cleaning and cutting operations.
Ultra-High Pressure Design: Specifically engineered for ultra-high pressure (UHP)water jetting, capable of handling pressures typically ranging from 1000 bar (15,000 PSI) up to 2800 bar (40,000 PSI) or more, depending on size and construction.
Robust Reinforcement: Utilizes multiple layers of high tensile steel wire, typically in a spiral configuration, to provide maximum strength and resistance to the extreme internal pressure and impulse fatigue inherent in water blasting.
Abrasion-Resistant Cover: Features a tough, synthetic rubber cover designed for exceptional resistance to abrasion, cuts, impacts, weather, ozone, and chemicals encountered during water jetting operations.
Safety Critical: Manufactured to stringent international standards (e.g., EN 1829, SAE J517 100R12/R13 equivalents for UHP) to ensure safe operation at rated pressures.
Flexibility: Engineered to maintain adequate flexibility despite the heavy reinforcement, facilitating maneuverability during cleaning tasks.
Compatibility: Primarily designed for conveying high-pressure water. Compatibility with specific additives or abrasives must be verified with the manufacturer.
Industrial Cleaning: Removing tough deposits, coatings, and contaminants from surfaces in refineries, chemical plants, power generation facilities, ships, and heavy equipment (ultra-high pressure water jetting).
Surface Preparation: Preparing surfaces for coating or bonding by cleaning to bare metal standards.
Concrete Hydrodemolition: Precisely removing damaged concrete for repair.
Pipe and Tube Cleaning: Descaling and cleaning the interiors of pipelines and heat exchanger tubes.
Waterjet Cutting: Supplying pressurized water for precision cutting of various materials when equipped with an abrasive injection system (verify hose compatibility).
Q: What pressures can this hose handle?
A: Water-blast Hose ratings vary significantly by size and specific construction. They are typically rated for ultra-high pressures starting around 1000 bar (15,000 PSI) and can go up to 2800 bar (40,000 PSI) or higher. Always refer to the manufacturer's specifications for the exact working pressure and maximum operating pressure.
Q: Can this hose be used with abrasive materials?
A: Some Water-blast Hose variants are specifically designed for use with abrasive particles injected into the water stream. Others are for water-only applications. Using a standard hydraulic hose or a water-only UHP hose with abrasives will cause rapid failure. Always confirm the hose is rated and constructed for abrasive water jetting if required.
Q: Why is high tensile wire crucial for this hose?
A: The immense pressures generated in water blasting require exceptional strength to prevent rupture. The high tensile steel wire reinforcement provides the necessary strength-to-weight ratio and fatigue resistance to safely contain these pressures over the hose's service life.
| Type | I.D. | O.D. | W.P. | B.P. | B.Radius | Weight | ||||
| dash | inch | mm | inch | mm | Bar | Psi | Bar | mm | Lb/ft | Kg/m | |
| WB-06 | 3/8" | 10.0 | 0.87 | 22.0 | 1000 | 14500 | 2500 | 230 | 0.685 | 1.02 | |
| WB-08 | 1/2" | 12.0 | 1.03 | 26.2 | 1000 | 14500 | 2500 | 250 | 0.941 | 1.40 | |
| WB-12 | 3/4" | 19.0 | 1.42 | 36.0 | 1000 | 14500 | 2500 | 270 | 1.694 | 2.52 | |
| WB-06A | 3/8" | 10.0 | 0.87 | 22.0 | 1250 | 18125 | 3125 | 230 | 0.860 | 1.28 | |
| WB-08A | 1/2" | 12.0 | 1.03 | 26.2 | 1250 | 18125 | 3125 | 250 | 1.243 | 1.85 | |
The Water-blast Hose with High Tensile construction is engineered specifically for the extreme demands of ultra-high-pressure water jetting and cleaning applications. This specialized hose is built to withstand pressures often exceeding 1000 bar (15,000 PSI) and higher, safely conveying pressurized water, sometimes mixed with abrasives or cleaning agents. Its core strength lies in the high tensile steel wire reinforcement, providing the necessary structural integrity to contain these immense forces, ensuring operator safety and reliable performance in critical cleaning and cutting operations.
Ultra-High Pressure Design: Specifically engineered for ultra-high pressure (UHP)water jetting, capable of handling pressures typically ranging from 1000 bar (15,000 PSI) up to 2800 bar (40,000 PSI) or more, depending on size and construction.
Robust Reinforcement: Utilizes multiple layers of high tensile steel wire, typically in a spiral configuration, to provide maximum strength and resistance to the extreme internal pressure and impulse fatigue inherent in water blasting.
Abrasion-Resistant Cover: Features a tough, synthetic rubber cover designed for exceptional resistance to abrasion, cuts, impacts, weather, ozone, and chemicals encountered during water jetting operations.
Safety Critical: Manufactured to stringent international standards (e.g., EN 1829, SAE J517 100R12/R13 equivalents for UHP) to ensure safe operation at rated pressures.
Flexibility: Engineered to maintain adequate flexibility despite the heavy reinforcement, facilitating maneuverability during cleaning tasks.
Compatibility: Primarily designed for conveying high-pressure water. Compatibility with specific additives or abrasives must be verified with the manufacturer.
Industrial Cleaning: Removing tough deposits, coatings, and contaminants from surfaces in refineries, chemical plants, power generation facilities, ships, and heavy equipment (ultra-high pressure water jetting).
Surface Preparation: Preparing surfaces for coating or bonding by cleaning to bare metal standards.
Concrete Hydrodemolition: Precisely removing damaged concrete for repair.
Pipe and Tube Cleaning: Descaling and cleaning the interiors of pipelines and heat exchanger tubes.
Waterjet Cutting: Supplying pressurized water for precision cutting of various materials when equipped with an abrasive injection system (verify hose compatibility).
Q: What pressures can this hose handle?
A: Water-blast Hose ratings vary significantly by size and specific construction. They are typically rated for ultra-high pressures starting around 1000 bar (15,000 PSI) and can go up to 2800 bar (40,000 PSI) or higher. Always refer to the manufacturer's specifications for the exact working pressure and maximum operating pressure.
Q: Can this hose be used with abrasive materials?
A: Some Water-blast Hose variants are specifically designed for use with abrasive particles injected into the water stream. Others are for water-only applications. Using a standard hydraulic hose or a water-only UHP hose with abrasives will cause rapid failure. Always confirm the hose is rated and constructed for abrasive water jetting if required.
Q: Why is high tensile wire crucial for this hose?
A: The immense pressures generated in water blasting require exceptional strength to prevent rupture. The high tensile steel wire reinforcement provides the necessary strength-to-weight ratio and fatigue resistance to safely contain these pressures over the hose's service life.
